DYI Sheng TDS 1/2 inch Stainless Steel SUS 316 Air-Operated Double Diaphragm Pump Teflon Diaphragm Pneumatic Transfer Pump for Chemical and Industrial Use
- [SAFETY and EXPLOSION-PROOF] The operating pressure is between 1~8.3 bar, driven by air pressure. A Pneumatic Double Membrane Pump can dry-run for extended periods of time without getting overheated. Blocked suction or discharge pipework, the pump will stop due to air pressure balance, and the pipeline pressure will not continue to rise, not causing the danger of pipeline rupture and liquid leakage..
- [AODD PUMP CAN HANDLE A WIDE RANGE OF PH LEVELS] The pneumatic diaphragm pump design isolates the conveyed fluid from the pumping chamber. Diaphragm Pump is ideal for pumping highly corrosive and hazardous chemical fluids and volatile. Normal operation will not cause harm to the environment and operators..
- [Wide Applications] The diaphragm pump is suitable for almost of fluids. Pumps can be widely used in the automation industry, water treatment, mining, petroleum, oil and gas, coating, printing, electroplating, chemical industry, electronics, construction, Pharmaceutical, metallurgy, and other industries..
Check Stock
Automotive Smoke Leak Detector Tester EVAP Smoke Machine with Dual Mode
- ...es not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 7-15 seconds, dramatically reducing diagnostic time. Smoke output value: 1-6L/min..
- 【Flow Meter & Pressure Gauge】According to the pressure of the detection pipeline, it is controlled with a flowmeter to more effectively protect the pipeline from damage. By observing the pressure gauge, you can determine whether the pipeline is leaking more quickly and accurately. Usually the pressure gauge continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired..
- 【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports.
- in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection syst....
Check StockMonster Energy Juice, Pipeline Punch,16 Fl Oz (Pack of 24)
- UNLEASH THE BEAST: Banzai Pipeline, the world's most famous wave, on Oahu's fabled North Shore, comes alive for just a few brief months every winter. In honor of this epic force of nature, we created Juice Monster Pipeline Punch.
- ENERGY + JUICE: The perfect blend of the best flavors Hawaii has to offer - passion fruit, orange & guava, then "Monsterized" with a full load of our famous energy blend.
- STOCK UP WITH A 24 PACK: Banzai! Pipeline Punch Juice Monster is available in a convenient pack of 24.
Check StockFuel Filter Head 2001-2004 CHEVY Silverado GMC Sierra 6.6L LB7 Duramax Diesel pickup parallel pipeline 12639277
- Before installation, apply grease to the O-ring of the filter2001- 2004 6.6L Duramax LB7 CHEVY GMC fuel filter Head parallel pipeline.
- Brand new fuel filter head, facelift. The parallel installation pipeline is suitable for partially modified models..
- Please carefully observe the installation direction of the pipeline and compare with the picture.
- High-quality products, brand-new assembly process, leak tightness test qualified.
Check Stock
IQIHUI 7PCS AC Fuel Line Disconnect Tool,AC Line Disconnect Kit,Transmission Oil Cooler Line Quick Disconnect Kit for Ford GM Mazda More Vehicles,Size1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch
- 【Material】Fuel line quick disconnect heater hose disconnection tools are made of hard plastic to ensure strength and sturdiness..
- 【Founction】Oil cooler pipeline quick disconnect kit, used to disassemble/disconnect fuel pipeline, heater pipeline, AC cooling pipeline and other quick disconnect fittings..
- 【Application】The AC fuel line disconnect tool is compatible for most Ford, GM, Chrysler and Mazda models. It is also suitable for some other vehicles, and the automatic transmission line is within the size range..
- 【Easy to use】The compact size is easy to grasp, and the inclined design allows access to hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
- 【Package】Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
Check Stock
Small Toilet One Piece Ceramic Toilet Compact Bathroom Mini Commode Water Closet Dual Flush Concealed Trapway red-300mm
- 【8.0 enlarged pipeline】360° full pipeline glazing, 8CM thick pipeline design refuses to block The whole pipeline is glazing and flushing is more smooth. The silky glaze ensures that the dirt can pass quickly under the action of flushing, and it is not easy to stain.
- 【Sea whirlpool jet siphon technology】Drawing on the principle of natural waterfall drop, scientifically design the inner wall of the toilet Make the water flow swirling down rapidly, tacit understanding of rushing and sucking with strong impulse triple push, instant clean without residue!.
- 【Microcrystalline Zhijie Glaze】Multi-layer glazing is not easy to be stained. The surface calcined at high temperature is smoother, not easy to be stained, and it will be bright as new for a long time. (The high-temperature clay glaze is firm and durable, the low-glazed ceramic glaze is not easy to crack, the easy-to-clean glaze is not easy to stain, and the microcrystalline glaze is strongly boosted).
- 【Easily Installed With All-in-one Package】Two big installation access on the side allows the plumber to install this toilet much easier. Package includes toilet, soft closing toilet seat, pre-installed flush valve, high-quality wax ring, floor bolts, and also installation instruction..
Check Stock
316 Stainless Steel Compression Tube Fitting Union Straight Adapter Tube Double Ferrule Pipe Fitting Adapter for Pipe 2Pcs Ф1/2
- 【316 Stainless Steel】 The double ferrule pipe fitting adapter adopt high-quality stainless steel 316 material,the inspection indicators are in line with the standard guaranteed spectrometer..
- 【Good peformance without welding】The product has simple and firm connection, good sealing, no need for welding, high pressure resistance and vibration resistance..
- 【Easy to clean】The surface of the joint is finely polished by a special process, the hand feels good and delicate, and the interior is clean and bright..
- 【Suitable for complicated pipeline connections】Suitable for some complicated pipeline connections that cannot be welded, and can pass through gas, liquid, oil and general corrosion pipeline systems..
- 【Comply with national standard】 The double ferrule straight‑through joint is a relatively common national standard joint, which serves as a connection between steel pipes..
Check StockSydien 20Pcs White 25mm/1" ID White PVC Water Pipe Clamps U-Shaped Buckles For Water Pipes & Tubing Hoses Support With Screws
- ⭐Package Content: 20Pcs PVC Water Pipe Clamp & 20Pcs Wall Anchor & 20 Pcs x Screws.
- Overall Size: 32mm*15mm*38mm/ 1.26" * 0.59" * 1.50"(L*W*H).Fits for tubes with 25mm/ 1" OD..
- ⭐High Quality: Made of PPR plastic material ensuring abrasion-resistance and rust-resistance..
- ⭐Space Saving: Water pipes or hoses can be firmly fixed on the ground or wall under the lock of the clip, which can make the pipeline more tidy and effectively save space..
- ⭐Application: Suitable for water supply pipeline system and cable wiring pipeline system. Also used for laying and installation of water pipes, oil pipes, PEX pipes, etc..
Check StockLixada 90mm Guide Wheels Protective Cover for 23mm Pipe Sewer Pipeline Inspection Camera
- --Black plastic cover fits 23mm camera head, and provides maximum protection..
- --5 wheels easily go through pipes over 90mm..
- --Great accessory for your valuable pipeline inspection camera system..
Check StockLot of 4 - Jet Torch Jumbo Gun Pen Torch Lighter Butane
- Ideal for daily use and outdoor activities such as camping, fishing, hunting, welding, and melting.
- Repairing pipeline, removing paint &repairing jewelry. Do not keep lit for more than 30 seconds, this can make the lighter last longer.
- Ideal for daily use and outdoor activities such as camping, fishing, hunting, welding, melting, repairing pipeline, removing paint &repairing jewelry.
- In Compliance with DOT Regulations - Butane Fuel is Not Included.
Check StockLot of 2 - Jet Torch Jumbo Gun Pen Torch Lighter Butane
- Ideal for daily use and outdoor activities such as camping, fishing, hunting, welding, and melting.
- Repairing pipeline, removing paint &repairing jewelry. Do not keep lit for more than 30 seconds, this can make the lighter last longer.
- Ideal for daily use and outdoor activities such as camping, fishing, hunting, welding, melting, repairing pipeline, removing paint &repairing jewelry.
- In Compliance with DOT Regulations - Butane Fuel is Not Included.
Check StockCoating For Pipeline
Ultimate Protection for Your Pipes: Pipeline Coating! If you’re searching for the best way to keep your pipelines in top shape, look no further. We've got you covered with our list of the top 11 pipeline coatings in the market! let's dive right in and discover which coating suits your needs.
1. Epoxy Coating: This durable coating provides excellent resistance against corrosion and can withstand extreme temperatures.
2. Polyurethane Coating: Ideal for underground pipelines, this coating offers outstanding flexibility and abrasion resistance.
3. Fusion-Bonded Epoxy (FBE) Coating: This popular coating offers exceptional adhesion and is widely used in the oil and gas industry.
4. Coal Tar Enamel Coating: Known for its high resistance to water and chemicals, this coating is perfect for areas with challenging conditions.
5. Polyethylene Coating: Offering a strong barrier against corrosion and UV rays, this coating is commonly used for both underground and aboveground pipelines.
6. Teflon Coating: This non-stick coating is ideal for pipelines that transport materials prone to sticking. It provides an easy-to-clean surface and reduces friction.
7. Zinc Coating: With excellent galvanic protection, this coating is highly effective in preventing corrosion and rust formation.
8. Ceramic Coating: Designed to withstand high temperatures, this coating is ideal for pipelines used in industries such as power generation.
9. Bitumen Coating: Offering reliable protection against corrosion, this coating is commonly used for pipelines that transport water and oil.
10. Silicone Coating: Known for its resistance to extreme temperatures, this coating is perfect for pipelines exposed to both heat and cold.
11. Acrylic Coating: This versatile coating provides excellent adhesion and is highly resistant to weather and UV damage.
Now that you're aware of the best pipeline coatings available, it's time to make your choice! Remember to consider factors such as the type of material being transported, environmental conditions, and application method. By choosing the right coating, you can ensure the ultimate protection for your precious pipelines. 
