Revolutionize your welding game with our cutting-edge Aluminum Brazing Rod for flawless joints and unbeatable strength!

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

• MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
• ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
• PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
• APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
• crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
• SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

• 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
• 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
• 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
• 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
• crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
• 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

• ...lux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
• 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
• 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
• 【Moistureproof】BLUEFIRE flux cored welding wire won't absorb water, so it can be stored in various environments for a long time. The special moisture-proof....

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

• Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
• Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
• Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
• Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
• brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
• U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..

Heyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs

• 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
• 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
• 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
• 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.

100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)

• Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
• High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
• Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
• Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily： Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..

Heyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs

• 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
• 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
• 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
• 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.

Forney 48571 Super Sil Flo Brazing Rod, 1/8-Inch, 1/2-Pound

• Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
• Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
• T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
• Sil-flo is not recommended for ferrous metals such as iron or steel.

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

• MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
• ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
• PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
• APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
• SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

• Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
• Copper (Cu): Rest. For the best results..
• Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
• Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
• Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
• Service: Fox Alloy Time-proven formulation.
• A team of experienced welding engineers ready to answer all your welding questions.

Forney 48490 Flux Coated Bronze Brazing Rod 3/32-Inch-by-18-Inch 10-Rods

• Fluxed low fuming bronze brazing rod is a high quality, low fuming bronze brazing rod with flux.
• Formulated for high tensile strength and ductility.

Hot Max 23076 1/8-Inch E4043 Aluminum Arc Welding Electrodes, 1#

• All position rod for all types of aluminum including tubes, sheet, cast and wrought aluminum.
• E4043 is the highest strength alloy for ARC and gas torch welding.
• Product can be used with gas torch applications as a brazing alloy.
• Weight No. 1, Diameter of 1/8" and amperage of 80 to 135.
• We recommended machine polarity: DCEN (DC-).

Lucas-Milhaupt 99088 Flux Cored Aluminum 822

US Forge Welding Electrode E6011 3/32-Inch by 14-Inch 5-Pound Box #51123

• All position rod for all types of aluminum including tubes, sheet, cast and wrought aluminum.
• E4043 is the highest strength alloy for ARC and gas torch welding.
• Product can be used with gas torch applications as a brazing alloy.
• Weight No. 1, Diameter of 1/8" and amperage of 80 to 135.
• We recommended machine polarity: DCEN (DC-).